I saw that Roanyer's price for a full silicone body suit at a discount was $490, and that was with the added costs for silicone gel breasts and urination pouch with penetrable vagina. I decided to go with Roanyer over Eyung because the suit was less expensive than an Eyung suit without the zipper ($593); and unlike Eyung, Roanyer charges the same price with or without the zipper
I contacted Roanyer about sizing of the suit to make sure that I would fit into it and was told by Yolanda that they have a “a new arrival, which is suit with arms-small size” and was sent some pictures of the suit and it looked great and had huge H cup breasts. The suit was not listed on their website and I just assumed that its measurement would match the sizing of their smaller size suit without sleeves. And was told to “leave a message in the order you like the small Suit with H cup”.
I also purchased a set of large silicone hip pads and was given a free gift of a set of purple earrings and matching necklace for spending over a certain amount during the Black Friday sale. The shipping was very quick and I received the package within 12 days.
Check out my unboxing video: UNBOXING ROAYNER H CUP SILICONE CROSSDRESSER BODYSUIT WITH ARMS
It arrived in a plain box with the customs form saying “party mask” and could feel it moving around a bit in the box, I could barely contain myself and opened it and found the nice info and care brochure and the suit wrapped in plastic. I laid it on the floor and could feel the oils from either the manufacturing process or seeping out of the fresh silicone so I thoroughly washed the suit with some dish soap and let it soak for a few and then dried it off.
Link to suit: Roanyer Crossdresser Suit with Arms
Suit sizing in cm:
First is my measurement of suit laying on floor,
FS- Roanyer’s full suits advertised measurements,
SS-small suit without sleeves advertised measurements,
[my body’s measurements, Height 170, Weight 63kg]
Neck circumference 33 (FS 35, SS 35) [36]
Shoulder width 44 (FS 36) [47]
Shoulder circumference 101 [112]
Bicep circumference 25 (FS 28) [28]
Bust 98 (FS 97, SS 90) [93]
Under bust 80 (FS 73) [90]
Waist belly button 72 (FS 70, SS 63) [82]
Hip bones above butt 90 [84]
Around butt 99 (FS 98, SS 89) [90]
Thigh circumference 51 (FS 54, SS 52) [51]
Top of groin to top of neck 79 [76]
Inseam 74 (FS 81, SS 67) [72]
Armpit to wrist 46 (FS 51) [47]
Knee circumference 32 [35]
Calf circumference 32 [35]
Ankle circumference 18 [22]
Elbow circumference 22 [26]
Forearm circumference 21 [26]
Wrist circumference 16 [17]
U seam 175 [168]
Total 167 (FS 148, SS 131)
Silicone thickness varies a bit: Neck 4-5mm, Wrist 3-4mm, Ankle 4-5mm
Link to Pornhub album with pictures: ROANYER H-CUP SILICONE BODYSUIT
Getting into suit for first time:
So like the instructions and info sheet said, I covered the inside of the suit and myself with talcum powder (baby powder) and started to slide my legs into the neck hole. The silicone is very stretchy and I was able to slowly get it past my hips and to my waist somewhat easily with my legs sliding in. Now here is where the struggle started, moving the small neck up my waist and chest and trying to fit in my arm was very difficult and made the silicone neck hole very tight and made breathing harder (since you're stretching the hole the three times its size). And once my arm was in the sleeve it was impossible for my other arm to pull the silicone over my shoulder. I strained trying to do this for at least 20 mins putting my arm in and out and trying my other arm, until I said screw it and just lifted my arm above my head with lots of strength and it slid and popped over. Then I just had to work my other arm in and do the same thing again and I popped completely into the suit.
Wearing suit:
To say the suit hugs you is an understatement, it is very tight and starts to stick to your body as your sweat is absorbed by the talcum powder. The skin looks real and has a soft and smooth feel all over. It has lots of stretch so moving around is very easy and not hindered, but it will wrinkle up or fold in certain spots. The neck goes all the way to the bottom of the skull for no visible neck line. The breasts are huge (H cup I was told) and very soft and have very nice bounce and shake. The nipples are large and prominent and have little bumps on areola for realism. The vagina has a natural look and long sheath for penetration and the urination tube exit is hidden at top of vagina slit. It wasn't easy to put the sheath on, having to puts your hands down the neck hole while is already stretched around your waist; and I never got the chance to try out its purpose. The suit is thick and I got hot quickly and sweat started to collect and leak out the sleeves.
Removing the suit:
I tried and struggled to get the neck down over my shoulder and was physically unable to using all my strength. Laughing to myself I can see my they say you need assistance getting into and out of the suit. So good thing I was prepared, thanks to reading JustAnima’s review of the Eyung suit (Thank you JustAnima!), I had a tie down hook with strap to help pull the silicone down. Hooking the neck and stepping on the strap I was able to slowly pull it down over one shoulder and slide one arm out. After one arm was free it wasn’t too hard to slide out since I was all sweaty which helped lubricate my exit.
My first big problem:
Immediately after getting the suit on I noticed that the hips and butt are very loose and the thighs kept bunching up. I thought the legs might be too long and had to roll them up a lot and then was still getting the same problem and could feel that the entire torso was too long and hanging down. When I would squat or bend over it would bunch up around the crotch and thigh. So the lower torso of the suit is too large and too long for my body.
My mistakes:
Roanyer’s customer service didn’t actually answer a lot of my questions and I just assumed things since they didn’t correct me. And I should have asked for exact measurements of the suit they were sending me. I have contacted them about the fitment issues and they said to wear some silk stocking under it to help hold it up, I can trim the legs, and will give me $50 off my next purchase.
My second even bigger problem:
So I took their advice and the third time dressing into the suit I put on some pantyhose to help hold it up; and when putting on the suit could feel that the fabric did grip the silicone a bit but could still slide in somewhat. I went slowly and got my legs in and worked the tight neck up to my hips and butt which became more difficult so I went even slower going bit by bit. And then my worst nightmare happened and a piece of the neck of the suit completely ripped off into my hand and before I could even freak out about that I felt the suit rip down further. As my heart sank I had to slowly work the suit back off and held onto the rip and somehow it didn’t rip down any further. It must have been a combination of the grip of the fabric of the pantyhose and too much stress at one spot of the neck when it’s already very stretched out. I didn’t think I was being rough with it, especially compared to all the stretching I did to get into it the first time. So I was never able to try wearing the suit with hip pads.
Overall:
It is a quality made suit with very lifelike look and feel. But it was made for a person who has a longer torso and larger hips than me. There are some very light indented seams going down the arms, legs, and sides but are really only visible at close range. The skin color is close to my CreaFx Taylor but it looks like my mask’s skin is slightly more reddish and orangish. Putting my mask on is a bit difficult to feed the extra length of the silicone down the neck because it will start to choke when pulling open the neck. And I hope I’m not causing a problem but on the inside right shoulder there is 2ndSkin imprinted, so this suit is either the same as the one 2ndSkin/RubberSisters sell or uses the same mold. Maybe this suit isn’t posted for sale on their website because of that (and still isn’t listed at this time).
Since the suit doesn’t fit me very well and is now damaged goods, I might attempt a repair of it and will probably sell it, so let me know if you are interested and I will inform you when I list it for sale (probably on ebay).
If you have any questions on anything, don't hesitate to ask. Or if you have a suit also I'd love to chat.
Thanks for reading and watching and I hope this was helpful. I have more to come in the near future ;)
Questions and Answers:
Q: So, it sounds like you don't recommend it. Is that correct?
A: No, I wouldn't say that. But for someone of my smaller size the torso was way too long and the neck entry was a problem. Even thou the look without the zipper is nice, the ability to get into and out of easier is worth it (but others have problems with zipper ripping out). So if you are a larger person then me (and most are) it should fit you better then it fit me. And I would not recommend using any stockings or anything under the suit, or be extremely careful when doing so. I am thinking about making a device or rig that could hold the neck open so I could like step into it and maybe that will make it easier and safer.
Q: So, it sounds like you don't recommend it. Is that correct?
A: No, I wouldn't say that. But for someone of my smaller size the torso was way too long and the neck entry was a problem. Even thou the look without the zipper is nice, the ability to get into and out of easier is worth it (but others have problems with zipper ripping out). So if you are a larger person then me (and most are) it should fit you better then it fit me. And I would not recommend using any stockings or anything under the suit, or be extremely careful when doing so. I am thinking about making a device or rig that could hold the neck open so I could like step into it and maybe that will make it easier and safer.
So, it sounds like you don't recommend it. Is that correct?
ReplyDeleteThank you for the detailed review, and I'm sorry it didn't work out as you'd hoped.
Question and Answer section added to post. I kinda tried to leave my review neutral and just pointed out the good and bad things and my experience with it.
ReplyDeleteThanks, yea there's always the next suit ;)
They say, your size should be more then size of the suit, then it fits perfect, due to that Silicone normally expends 30 percent and up to 150 percent, when you are smaller, the silicone suits could be really to great.
ReplyDeleteYea, if I was bigger or the suit was smaller it would have been great.
Deletebut the neck is the main problem, in normal conditions the silicone must stretch and go back
ReplyDeleteyea the neck has to stretch over the widest parts of your body, and others have had problems with the neck being too tight on their neck and restricting breathing and blood flow. The silicone is very stretchy and strong but gets weak when all stretched out to its max.
DeleteHello Jayne.
ReplyDeleteVery helpful & informative. The suit/2nd skin looked very inviting to climb into. A very exciting feeling I am sure.
I contemplate doing as You have for quite some time & often.
You mentioned some where during Your blog a Mechanism for easing entrance into the suit.
A vacuum box may be viable, large tho & not without technical issues. Ever seen one in action?
First time I saw one being used, all I could think of for years was I gotta make one big enough for a person. Still do.
Meow
Thanks! Yes it is.
DeleteMy idea for a device is a metal circle or ring, maybe like an oval, and to have four or more hooks attached that can be pulled and held back. Could be made with the reversible one hand clamps and could maybe be mounted on like a stand, or could use a metal trash bag holder with a thicker/stronger circle or square on top; or even like hung from the ceiling. Using the stand would cause problems because it is heavy and probably shouldn't be only held up and supported by just the neck. But maybe hanging from the ceiling and being able to be lifted or hoisted up as getting into it. Another idea would be to have an inflatable ring that would hold open when inflated and be large enough to fit though, maybe made from like a inflatable back brace or a large neck pillow, or make from like a pool toy inflatable if there is on the right size and shape. If you have any ideas please let me know.
Well they do have them big enough for people (and they are actually pretty simple to make.) I've seen vacuum beds, cubes, bags, sacks, and even pyramids but never in person; they look like lots of fun, if thats what you're talking about.
This vacuum box I saw was 3 decades ago in a Shopping Mall. They took a large transparent balloon, pre-stretched the opening, then blew it inside out, affixed the opening to an iris like aperture and turned on the vacuum. This pulled the balloon in, opening it up powdery surface inside and pulled the balloon to the sides of the enclosure (box). Gently they opened the iris. Then I had them put a gift inside. Quite a marvel. They put a rather large Doll, with a diamond ring attached inside, with landscape materials underfoot. Then closed the iris, and tied it off. I could not help but think at the time & still think, I gotta make one for myself.
ReplyDeleteMeow
Oh that's way different from what I was thinking. That's a very cool idea (and after googling it for a bit you can make one from a 5 gallon bucket) but wouldn't really work for this suit since it has openings at the hands, feet, and urination holes. And a person sized machine would be fun and if it were a completely airtight suit that would work great. But the mechanical iris sounds like it's what would prob be the idea, could have many hooks to spread out the pressure on the neck and able to be slowly stretched open or closed; but I would have to build it since they are expensive if you can even find them for sale at all in the size needed.
DeleteHello Jayne,I saw the same suit like yours from Roanyer.But I cannot get it out alone with anyone helping me to pull it out from my shoulder.I used shower only without any shampoo or soap.But I don't have the tie-down straps.Do you think I should get a straps like yours too?.Please advice.Best regards.
ReplyDeleteI would recommend getting some tie down straps, at least something with a strong hook that won't bend and not sharp so it won't pierce the silicone and long enough so you could step on it or put under something for leverage. I needed the hook as I was unable to pull it down over my shoulder without it, but I never got to try taking it off in the shower. And some soap would help lubricate it.
DeleteIn a video Roanyer sent me of someone getting into and out of the suit, they used lube when getting in and were in the shower to also help lubricate. But all they had to do was pull their arm up into the sleeve as much as they could then was able to stretch the neck down over the shoulder and then slip the arm up and out. I hope this helps!
Yes i am totally agreed with this article and i just want say that this article is very nice and very informative article.I will make sure to be reading your blog more. You made a good point but I can't help but wonder, what about the other side? !!!!!!Thanks フィメールマスク
ReplyDeleteThanks for reading! 😘
DeleteWhat do you mean by "other side"?
roanyer.com scam!!
ReplyDeleteI emailed some time ago about the product tearing. I never heard back. I have 2 products which they both have torn.
I'm sorry for that. I wouldn't call them a scam. But I am very disappointed that they don't help out customers when their product tears or rips.
DeleteWhen I informed them of the rip in my suit all they said was,
"I am really sorry for your problem, the suit will be ripped under the hard pressure, my friend.
Here attached the video for how to wear the suit. You may check from it again.
I asked my workmate to help me to confirm if you can wear this suit, try to help you with all my heart, and I did not expect that I cause you frustrating like this, please accept my apologize.
Hope everything goes well by your side."
I know I will not be purchasing any more products from Roanyer unless they do something to show they care about their customers who buy and use their products.
Dear Jayne-
DeleteI created this google account just so i could comment here. Just wanted to say i am also a Roanyer customer who had a very similar experience - I bought the D cup suit with open anus unfortunately when i was putting it on for the first time i exerted too much tension around the neck area and it left a 3 inch tear across the clavicle. I explained the problem to Roanyer and they explained i should attempt a repair. They reimbursed my £30 and i was able to obtain a tube of liquid silicone called Silpoxy from Bentley chemicals in Buckinghamshire. This is about the only adhesive on the market that can fix repairs of this nature. While the suit is in by no means pristine condition i can wear it again able it has a rather nasty scar across the original tear site. Unfortunately applying foundation and concealer powder does little to diminish the damage. The most dissapointing part is Roanyer provides no English instructions for customers attempting to wear them for the first time. The method i found works is to only attempt wearing the suit in the shower and applying a generous amount of sex lubricant to the torso and arms before trying the stretch the suit over the shoulders. If anyone is considering buying a Roanyer suit i'd recommend it as long as they apply this method, as long as they are very tall and broad shouldered like myself (over 6ft).
Thanks for telling about your experience with Roanyer's suits.
DeleteI have recently repaired my suit with Silpoxy also and will post a video of it sometime. I haven't tried to use anything to conceal the tear but it is definitely visible. You could possibly use some type of silicone filler to smooth out and cover the tear but it will probably need to be airbrush painted to blend in (and thats all skills that I don't have.) I agree that talcum powder or lube is 100% necessary to get into the suit and the water from the shower can help too.
A warning if you purchase the suit without the penetrable vagina and catheter: be careful of tearing/ripping of the vaginal opening, especially at the bottom corner, closest to the anus. In their current version, there is a reinforced liner/mesh that you can see on the inside of the suit around the vagina opening. The reinforced liner is only applied to the upper-half of the opening.
DeleteAfter wearing the suit once, I noticed a small rip had started at the bottom corner of the hole. Roanyer recommended purchasing "Psycho Paint" and using it to adhere your own mesh liner cut out from stockings to prevent further ripping. I would recommend doing this pre-emptively before wearing the suit for the first time.
Thanks for the Silpoxy recommendation. I just received it in the mail and will try to repair the rip, which has since worsened (Didn't have the patience to wait for the psycho paint... The rip actually started going upwards, so I have a flap of the labia now dangling...). Once I use Silpoxy, I will try the trick with the Psycho Paint.
If you purchase the suit that has the opening in the butt, you may want to check for the reinforced liner, and apply your own mesh if its not present.
Apparently this problem is due to their production process. They leave part of the opening without the liner so that they have a smooth surface silicone on which to attach the vagina prosthesis. I don't see why they can't go the extra step of applying the liner around the remainder of the vagina when someone orders the open version.
Thank you for the detailed tips, hopefully they will have fixed most of these problems with the new suits and designs.
DeleteNice post, thanks for sharing.
ReplyDeleteExplore the latest collection of Premium Sex Dolls at JS Dolls. Explore now for more info.
Hi I was wondering my suit has a butt sheath too! Do I put that up my butt or leave it between my cheeks of butt? Please write me back!
ReplyDeleteHey, I usually just put it between my cheeks, but you could do either.
Delete