Saturday, April 6, 2019

Eyung F-Cup Full Body Silicone Suit Review

After getting the Roanyer suit and being disappointed in its fitment and difficulty getting into and out of, I decided to try a different one and see how it fits. So I contacted Eyung with my measurements and was helped out by Kevin who recommended the F cup suit over the D cup suit which appears to be smaller. I decided on a suit with a zipper because it was $200 cheaper and should be much easier to get put on and take off. Eyung had a sale going on with items up to 47% off and I was able to purchase the F cup suit with a zipper in color #2 ivory for $393 with discounts and coupons.

Link to suit: Eyung F cup Bodysuit for Crossdresser with sleeves

Coupon for $5 off: Aliexpress $5 coupon for Eyung
(if enough people use the couple I can receive a free product from Eyung)

The shipping was very quick with many updates from Eyung and I had the suit 11 days from placing the order. It came in a plain brown box and was wrapped in plastic and in a large plastic bag. It also had a lovely letter from the company that was incredibly hard to read due to its broken english but I understood the positive message it was trying to say. Like the other suit it was covered in oil from the manufacturing process or seeping from the fresh silicone, so I washed and dried it to prepare for wearing.

Check out my unboxing video: UNBOXING EYUNG F-CUP SILICONE FULL BODY SUIT

Suit sizing in cm:

First is measurement of suit laying on floor,
FS- Eyung’s F cup full suit advertised measurements,
[my body’s measurements, Height 170, Weight 63kg]

Neck circumference 34.5 (FS 36) [36]
Shoulder width 45 (FS 41) [47]
Shoulder circumference 103 [112]
Bicep circumference 24 [28]
Bust 84 (FS 92) [93]
Under bust 71 (FS 72) [90]
Waist belly button 63 (FS 64) [82]
Hip bones above butt 88 [84]
Around butt 99 (FS 90) [90]
Thigh circumference 51 (FS 51) [51]
Top of groin to top of neck 72 [76]
Inseam 74 (FS 75) [72]
Armpit to wrist 44.5 [47]
Knee circumference 33 [35]
Calf circumference 31.5 [35]
Ankle circumference 18 [22]
Elbow circumference 20.5 [26]
Forearm circumference 21 [26]
Wrist circumference 13 [17]
U seam 175 [168]
Total length 148-to front neck, 157-back neck (FS 143)

Silicone thickness: Neck 2-3mm, Wrist 2-3, Ankle 2-3

Link to albums with pictures of suit and wearing suit:
EYUNG F-CUP SILICONE FULL BODY SUIT WITH SLEEVES
EYUNG F-CUP SILICONE BODYSUIT WITH HIP AND BUTT PADDING

Getting into suit for first time:
I covered the inside and myself with talcum powder and slid my legs and hips into it, being careful to try and not stretch the zipper since others had said theirs have ripped out (it’s easy to see how that happens since the zipper is just glued on). Was able to fit into the suit quite easily but zipping up the zipper took some time. I attached a lanyard to the zipper but didn’t want to pull on it too hard, so I pulled back my shoulders as much as possible and slowly worked it up, pulling open the neck to force some air into the suit to help move and stretch the sides towards the back. And once the zipper was up over about half way it became very easy and zipped up the rest of the way.

Wearing suit:
This suit fits so much better then the Roanyer one, the torso isn’t way too long like the other suit but the lower part still isn’t a tight fit. The butt and hips are loose but with silicone hip pads they are tighter but not super tight like other places of the suit. The suit sticks to your body and has lots of stretch so moving around is easy and not hindered, but it will wrinkle up in certain spots but that’s kind of like how skin moves too. The arms and legs are great length for me. The breasts are very soft and bounce and shake very realistically. The vagina sheath goes between the legs and kind of goes between your butt cheeks (mine has a hole at the end of the sheath and I don’t know if that was part of the design or a manufacturing flaw since other pictures don't show the hole), and the urination exit is a small tube at the top of the vagina slit. The urination sheath isn’t hard to stretch and pull on but its placement causes a bulge in the suit and sits at an angle so fluid flow can be difficult.

Removing the suit:
Getting out was pretty easy, just attach lanyard to zipper and unzip. Then pull off your arms and work the suit down, being careful to try and not put too much stress on the zipper, and slide it off my hips and legs. Getting sweaty helps lubricate the exit and makes the suit slide over your skin.

Overall:
I really like this suit and didn’t want to take it off. It fits a person of my size well but if you have a slightly longer torso it would fit better. Wearing silicone pads with it provides the best fit and they have a some jiggle to them. It’s easy to put on a mask with the zipper in the back, and the low/mid neck line is visible but could be covered by a choker or necklace or turtleneck. The skin tone very closely matches my CreaFx mask, even more then the Roanyer suit. It does have visible seams down the arms, legs, and sides and a white zipper that sticks out and some people don’t like that look, but I don’t mind it because it makes it look like a skinsuit; but without seams would be better. I plan on purchasing the D Cup suit (maybe without a zipper) sometime in the future, hopefully on sale :) ; and hope it fits even better than this one and I will be able to compare all of them.

10 comments:

  1. also expensive Transportation costs? and also for Customs? when you order and send to Germany, you will pay around 170 Euro and then you pay around 130 Euro für Customs - Tax

    ReplyDelete
    Replies
    1. Shipping was free and the US doesn't have customs tax up to $1600 (depending on import location) but I think I remember the customs label saying about $150 or $200 worth of "party mask" if that helps you.

      Delete
  2. In German tax above 40$, then customs costs due to Tax! The customs want to see normal payment! So you pay for an suit also tax for delivery (150€) and customs and additional feeincrease an suit of 473€ to more then 600€

    ReplyDelete
  3. Yes it is penetrable vaginally but not anally.

    ReplyDelete
  4. the whole at Eyungs Vagina is normal, it is to clean it better and get it dry, at the Roanyer-Suit it will not dry really good.

    ReplyDelete
  5. and how run the zipper, that is also sometimes an problem. At the suit without zipper is the main problem the entry, could you glue it?

    ReplyDelete
    Replies
    1. The zipper can be difficult to pull up because you can't pull too hard or the zipper could rip out. And you have to be careful because the silicone will be all stretched around your chest and it will put stress on the zipper, so you need to stretch out the silicone as you zip it up to not put all the force on the zipper itself.
      Yes getting into and out of a neck entry suit can be very difficult (and I talk about it more in my Roanyer H Cup suit review)
      I don't know if you could glue it, holding the silicone together for the glue to dry while its all stretched out would be difficult.

      Delete
  6. Hi Jayne. Not sure if you're still updating this blog or not, but it's been a great source of information for me. I have a few questions regarding colours of the suits and the different manufacturers which I'll put in another post. x

    ReplyDelete
    Replies
    1. Thanks for the kind words! I will try and answer you questions as best I can, but there have been lots of changes and advances in silicone suits in the past year.

      Delete
  7. Nice post, thanks for sharing.
    Explore the latest collection of Premium Sex Dolls at JS Dolls. Explore now for more info.

    ReplyDelete